Nitecore P20UV Precise Flashlight Black
Nitecore P20UV
Portable, Powerful & UltraViolet
Nitecore has added an ultraviolet version of the P20 to the Precise Series family. You still get the same scratch-resistant anodized aluminum body, dual-switch tail cap, intuitive interface, just with the addition of four secondary ultraviolet LEDs. For those looking for a reliable emergency light around the house, to serious hikers and campers in need of a tough and lightweight device, the P20UV is the light to have. Now, if your an officer or military personnel who needs an ultraviolet light they know they can depend on, then the P20 does it all.
Lighting Technology
CREE LED + UV LEDs
The P20UV is fitted with the latest XM-L2 LED from CREE outputting a blazing 800 lumens while in High mode. There are also four secondary ultraviolet LEDs which provide 320mW at 365nm for those authentication, forensics, and identification applications. The P20UV features three selectable modes bringing versatility and flexibility. Tactical mode was designed for self defense, featuring only strobe, high and UV mode. Law enforcement mode was designed for patrol duty applications, featuring strobe, high, mid, and UV mode. Finally, there is General mode, which is designed for daily use, featuring strobe, high, mid, low, and UV mode. Controlling the intuitive interface can easily be done with one hand via the dual-switch tail cap. You get a dedicated strobe button, which is constructed from metal and can be accessed from any state.
Power
Battery Power Indicator
Powering the P20UV are either two CR123A batteries or a single 18650 cell. The included battery magazine makes sure the CR123A batteries do not rattle around in the light and help maintain electrical continuity. The P20UV comes equipped with an integrated LED in the tail cap switch to indicate remaining power, so you'll never be left in the dark. Three flashes mean the battery levels are above 50%, two flashes mean the levels are below 50%, and one flash means the battery power is close to depletion. The IPX-8 rating ensures the P20UV will operate even if it gets dropped in a puddle or if it starts raining. If you do happen to drop it , no worries, the aero-grade aluminum alloy body is impact resistant up to 1.5 meters.
Features:
Dual light sources: 1 main LED, plus 4 secondary ultraviolet LEDs
4 ultraviolet LEDs provide 320mW at 365nm
Dual-switch tail cap designed for tactical use and easy application
Metal micro textured reflector provides a wide cone of peripheral light
STROBE READY™ button for quick access to strobe mode
Two-way titanium steel pocket clip
Anti-rolling design to provide a firm grip
Crenulated head design for use in emergency situations
Toughened ultra-clear mineral glass with anti-scratch coating
Constructed from aero grade aluminum alloy
HA III military grade hard-anodized finish
Impact resistant to 1.5 meters
Waterproof in accordance with IPX-8 standards
Included Accessories: nylon holster, CR123 battery magazine, pocket clip, tactical ring, lanyard, and spare O-ring
Specifications:
LED: CREE XM-L2 (T6)
Runs on: 2x CR123A or 1x 18650 (Batteries NOT included)
Output mode/Runtime:
Using 1x 18650
High: 800 lumens / 3.5hrs
Mid: 400 lumens / 5.75hrs
Low: 70 lumens / 15.5hrs
Using 2x CR123A
High: 800 lumens / 1.5hrs
Mid: 400 lumens / 2.5hrs
Low: 80 lumens / 8hrs
Peak Beam Intensity: 8100cd
Max Beam Distance: 180 meters
Dimensions:
Length: 5.28" (134mm)
Bezel Diameter: 1.25" (31.8mm)
Body Diameter: 1" (25.4mm)
Weight: 3.67 oz. (104g) (excluding batteries)
Operating Instructions:
Make sure light is turned off
Unscrew head of light
Push down on "strobe ready" button, which is on tailcap, and at the same time, screw head of light back on
Flashlight mode indicator blinks brightly one time to show "tactical mode"; two times for law enforcement mode; and three times for the general mode
If you want to switch through different levels, then just do everything listed above all over again
There are no reviews yet for this item.
